Premium Line Marking Victoria Get a line marking quote

Car parks · Warehouses · Sports courts

Line marking near me: how to choose a reputable contractor

Anyone can buy a line marking machine. Here's how to check a Melbourne contractor properly before they put a line on your car park or warehouse floor.

Last updated

  • Warehouse & factory safety lines
  • Car parks to Australian Standards
  • Night & weekend work

Get a line marking quote

Free and no obligation. A Melbourne line marking contractor comes back to you with a quote.

The short answer

Choose a line marking contractor who can show an active ABN, a current certificate of currency for public liability insurance, and a written quote that names the material, preparation and standard they'll work to. For car parks, that standard is AS/NZS 2890.1, with accessible bays to AS/NZS 2890.6. For warehouses, the layout should follow your forklift traffic management plan. Then compare quotes on what's included, not just the price.

The rest of this guide walks through each check, the questions worth asking, the red flags we'd walk away from, and how to read two quotes side by side. If you'd rather skip the legwork, send your job through the form on this page and it goes to an independent line marking contractor who works your part of Melbourne.

Why choosing carefully matters

Line marking looks simple from the outside, and that's the trap. A bad job doesn't show up on day one. It shows up three months later when the lines are peeling under forklift wheels, or when someone points out that your accessible bay is the wrong width, or when an inspector asks why the walkway on your floor plan doesn't match the walkway on your floor.

On a commercial site the lines do real work:

  • In a warehouse or factory, they separate people from forklifts. WorkSafe Victoria lists floor markings, pedestrian and forklift exclusion zones, and pedestrian crossings with barrier gates on forklift routes among the controls to consider in a forklift traffic management plan.
  • In a car park, bay sizes, aisle widths and accessible bays are set by Australian Standards, and the layout may also be fixed by your planning permit.
  • Everywhere, faded or wrong lines are a liability. If someone is hurt, the first question is often whether the site was clearly marked.

So the cheapest quote is only cheap if the lines are in the right place, made from the right product and still there in two years.

Five checks to run before you accept a quote

These take about ten minutes and catch most problems.

CheckHow to do itWhat you're looking for
1. ABNSearch the business name or ABN on the free ABN LookupABN active, the entity name matches the quote, and GST registration if the quote adds GST
2. InsuranceAsk for a certificate of currency for public liability insuranceCurrent dates, the same business name, and a cover amount that meets what your lease, landlord or head contractor requires
3. Safety paperworkAsk how they'll manage safety on your siteA safe work method statement (SWMS) where the work is high risk construction work, and a sensible plan for traffic, barriers and cure times
4. StandardsAsk which standard the layout will followAS/NZS 2890.1 for car parks and AS/NZS 2890.6 for accessible bays, or your forklift traffic management plan for warehouse floors
5. Past workAsk for photos and a reference from a similar jobWork on sites like yours (a car park isn't a warehouse floor), and a reference you can actually call

A good contractor won't mind any of these questions. Most will send the paperwork before you ask.

Safety paperwork: SWMS and white cards explained

Two pieces of safety paperwork come up often, and it helps to know when they apply.

Safe work method statements (SWMS). Under Victoria's OHS Regulations, employers and self-employed people must prepare a SWMS before high risk construction work starts. WorkSafe Victoria's list of high risk construction work includes work next to roadways used by traffic, which can apply to line marking on roads, estate streets and some car park entries. Ask the contractor whether your job counts, and if it does, ask to see the SWMS for your site. A generic template that hasn't been adapted to your site isn't much use.

Construction induction (the white card). Workers doing construction work, for example on a new build or an active construction site, need construction induction training. In Victoria, WorkSafe says that training must be delivered face to face by an approved provider, not online. If your job is on a construction site, the head contractor will usually check cards at the gate anyway.

For marking on an operating warehouse floor or car park, also ask how they'll keep your staff, forklifts and customers away from wet lines: barriers, cones, staging and when each area can be used again.

Questions to ask a line marking contractor

Use these on the phone or at the site visit. The answers tell you a lot about who you're dealing with.

  1. Which material do you recommend for my traffic, and why? Listen for a reason tied to your site, such as forklift traffic, external sun exposure or how often the layout changes. See thermoplastic vs paint for the main options.
  2. How long should it last here? Nobody can promise an exact lifespan, but an experienced contractor will give you a realistic range for your conditions.
  3. What preparation is included? Cleaning, degreasing, grinding and removing old lines make the biggest difference to how long new lines last. Preparation is also where cheap quotes cut corners.
  4. Will you set out the layout or follow mine? For a new layout, ask what they'll set out from: your planning permit's endorsed plans, a racking plan or their own measure-up.
  5. Can you work at night, on weekends or in stages? Most commercial jobs are done outside trading hours. Ask how they'd stage yours so the site keeps running.
  6. Is the price fixed, and what could change it? Common variations are extra preparation, old line removal and extra visits caused by the site not being clear.
  7. What happens if lines fail early? Ask what the contractor will do if lines peel or wear well before the expected lifespan, and get it in writing.

Red flags that should make you walk away

  • No ABN, or an ABN for a different business. Check it yourself on ABN Lookup.
  • Can't or won't show a certificate of currency. If something goes wrong on your site, you need to know they're insured.
  • No site visit or photos for a complex job. A contractor who prices a warehouse floor or a new car park layout without seeing it, or at least a plan and photos, is guessing.
  • A one-line quote. "Line marking, $2,400" tells you nothing about material, coats, preparation or what's excluded.
  • Vague about standards. If they can't tell you how wide a standard bay is or what an accessible bay needs, they're unlikely to set them out correctly.
  • Pressure to decide on the spot, or a large upfront payment in cash before any work is done.
  • Unsolicited "we've got leftover paint" offers. Treat any door-knock deal with care and run every check above.

How to compare two line marking quotes

Put the quotes side by side and check they're quoting the same job. Price differences usually come from these lines, not from one contractor being greedy.

Line on the quoteWhy it matters
Material and productPaint, epoxy, thermoplastic and cold applied plastic have very different lifespans and prices
Number of coatsOne coat is cheaper today and usually needs redoing sooner
Surface preparationGrinding or cleaning first is often the difference between lines lasting months or years
Old line removalLeaving old lines visible next to new ones causes confusion
Set-out and standardsNew layouts take measuring and planning, re-lines just follow existing lines
Timing and accessNight, weekend and staged work cost more but keep your site running
Barriers and traffic controlNeeded on busy sites, and sometimes quoted separately
GST and exclusionsCheck whether prices include GST and what isn't covered

As a guide, re-lining a Melbourne car park typically costs $8 to $20 per bay with a minimum charge of $450 to $800, and warehouse safety lines about $4 to $12 per lineal metre. See the Melbourne line marking price guide for the full breakdown.

Your rights if the job goes wrong

Under the Australian Consumer Law, services come with consumer guarantees. The ACCC explains that services must be provided with due care and skill, be fit for any purpose you made known, and be supplied within a reasonable time if no time was agreed. These guarantees can cover businesses buying services too, depending on the circumstances.

In practice, the best protection is a clear written quote that states the material, preparation, layout standard and timing. If lines fail early, raise it with the contractor in writing first, with photos and dates. If that doesn't resolve it, Consumer Affairs Victoria has information on resolving disputes with businesses.

Why a local contractor helps

Melbourne is big, and most line marking happens at night or on weekends. A contractor who already works your part of town can do a site visit quickly, schedule around your trading hours and avoid charging for long travel. That matters most for smaller jobs, where a minimum charge applies.

Requests through this site are matched with independent contractors across metropolitan Melbourne. See all areas, including Dandenong, Pakenham, Truganina, Laverton North and Epping.

Quick checklist before you sign

  • ABN checked and active, name matches the quote
  • Certificate of currency for public liability insurance received and in date
  • Material, number of coats and preparation written on the quote
  • Layout standard named (AS/NZS 2890.1, AS/NZS 2890.6 or your traffic management plan)
  • Old line removal included or clearly excluded
  • Timing, staging, barriers and cure times agreed
  • SWMS provided where the job is high risk construction work
  • What happens if lines fail early, in writing

Sources

Common questions

How do I know if a line marking company is reputable?

Check their ABN on ABN Lookup, ask for a current certificate of currency for public liability insurance, ask which standard they'll mark to, and ask for photos and a reference from a similar job. Reputable contractors provide all of this without fuss.

Do line marking contractors need insurance?

You should insist on public liability insurance for any work on a commercial site. Ask for the certificate of currency and check the dates and business name match the quote.

Does line marking need a SWMS?

A safe work method statement is required before high risk construction work, which can include work next to roads used by traffic. Ask the contractor whether your job counts and, if so, to show you the SWMS for your site.

Why are line marking quotes so different?

Usually because they aren't quoting the same job. Material, number of coats, surface preparation, old line removal and after-hours work all change the price. Compare those lines before comparing totals.

Should I get more than one line marking quote?

For anything beyond a small re-line, yes. Two quotes on the same scope help you see whether the price, material and preparation are reasonable.

How do I find a line marking company near me?

Send one request here with your suburb and job. It goes to an independent specialist contractor who works your part of Melbourne, who contacts you directly with questions or a quote.

What if my new lines peel early?

Contact the contractor in writing with photos and dates. Under the Australian Consumer Law, services must be provided with due care and skill. Consumer Affairs Victoria has guidance if you can't resolve it.

Keep reading

Car park faded? Warehouse lanes worn?

Tell us the site, the job and the timing. A Melbourne line marking contractor comes back with a quote.

Get a line marking quote
Get a line marking quote